Can you use polyurethane over alcohol ink?

What do you seal alcohol ink with?

Krylon Kamar Varnish is by far the most recommended sealant for alcohol ink projects! This is a spray-on product that is extremely easy to use. You can seal with just one or a few coats to really bring out the depth and sheen of your piece.

Can I seal alcohol ink with polyurethane?

I tried using Krylon’s Clear Polyurethane spray (http://www.krylon.com/products/clear-polyurethane-coating/) on alcohol ink on ceramic tile! … It worked! I sprayed one coat, waited about 30 minutes and sprayed a second coat.

Can you put resin over alcohol ink?

Today, we demonstrate how to resin over alcohol ink! Covering alcohol ink and yupo paper with a coating of ArtResin is easy – in fact, epoxy resin takes alcohol ink next level, giving it a glossy finish and deeply saturating the colours to make them pop!

Do I have to seal alcohol ink before epoxy?

If in doubt or for peace of mind, you can never go wrong erring on the side of caution and sealing your artwork first. For this particular project, however, it’s not necessary to seal alcohol ink on yupo paper before applying ArtResin for a couple of reasons. Here’s why: ArtResin is a sealant.

Do you have to seal alcohol ink on glass?

When using alcohol ink on glass, make sure to use a clear sealer such as resin or the Ranger’s Gloss Multi-Medium so the colors do not fade or wipe off.

THIS IS FUNNING:  Does raspberry flavored vodka have sugar?

Is alcohol ink on ceramic permanent?

Many alcohol ink artists paint on ceramic tile. … Alcohol ink tends to “flake off” ceramic tile if it is not sealed. In my earlier days of painting on tile, I did not know this. I sold a few tiles and gave some as gifts and was very dismayed to hear that they did not last.

How long do you let alcohol ink dry before epoxy?

Allow at least 24 hours or more for best results. In a well-ventilated area, spray artwork with 2-3 light coats, about 12-14 inches away from subject, allowing 30 minutes to an hour of drying time between layers. After final coat, allow Kamar® to dry completely before proceeding to step 2.